Freewing A-6 Intruder 80mm EDF Jet - PNP
Brand: Freewing
Product Code: 902

Freewing 80mm 12-Blade Metal EDF A-6 Intruder Attack Jet - Receiver Ready in Navy USS Forrestal Color Scheme.

During its service life, the Grumman A-6 Intruder was the US Navy and Marine Corps premier close combat, mid-wing attack aircraft. The Intruder was in service between 1963 and 1997 and was designed as an all-weather medium attack aircraft to replace the piston-engined Douglas A-1 Skyraider. We are proud to offer such a historic plane as our first 12 blade 80mm EDF offering. The A6 Intruder is easily one of the most requested models, so we wanted to offer an EDF jet that would stand apart from its competitors. As you've come to expect from Freewing Model, the A6 intruder is loaded with scale features and performance componentry. The new 80mm 12-blade EDF with metal housing powered by a powerful 1750kV motor produces nearly 6 pounds of thrust for awesome speed and incredible maneuverability. The sound produced from the 12 blade EDF will simply blow you away. While 5 and 6 blade EDF produce a high pitched whining sound, the 12 blade EDF with metal housing produces the "whoosh" and air crushing sound similar to a gas turbine jet. Additional upgraded features include a 80A Hobbywing ESC, 9g precision servos, electronic retracts with full metal shock absorbing struts, and scale drop down flaps. Own one of the most sought after, highly detailed, best built RC foam jet on the market - the Freewing A-6 Intruder


•12 Blade factory balanced EDF with metal housing combined with 3530-1750KV brushless outrunner motor produces realistic jet turbine sound and an incredible 6 lbs of thrust
•Composite fan blades combined with metal EDF housing make the A6 AMA compliant (the fan blades themselves are NOT metal, so there are no flying restrictions)
•Super scale details include two hand painted pilots, full instrument panel, refueling probe, scale drop tanks, airfoil panel lines, and complete USS Forrestal graphics package
•Optional weapons set can be added for increased realism
•80 Amp Hobbywing ESC with 5A BEC
•Electronic retractable landing gear with all metal shock-absorbing struts
•Steerable, shock absorbing nose gear for enhanced ground maneuverability
•Full function drop down flaps allow shorter take-off distances and slow, scale landings
•Full function linked horizontal stabilizer/elevator gives incredible climb and descent capability and true to life scale detail
•Carbon spars and EPO foam construction provide the perfect balance between strength and flexibility
•Nylon hinges on all control surfaces (superior to foam hinges)
•Outrunner motor, servos, ESC and EDF come pre-installed for your convenience.


•Minimum 6 Channel Radio
•6 Channel Receiver
•6 Cell 22.2V 4000 mAh LiPo Battery with EC5 connector
•Lipo Battery Charger


Wingspan-1170mm/46in Length-1200mm/47.2in Flying Weight-2260g/79.7oz CG (Center of Gravity) check manual Power System-3530-1750kV Brushless Outrunner Motor Electronic Speed Control-80A ESC, 5A BEC, EC5 Connector Propeller/EDF-80mm Metal EDF with 12 Blade Fan Servos: 9g standard with 100mm lead: nose gear steering 9g standard with 300mm lead: left flap, elevator 9g reverse with 300mm lead: right flap, rudder 9g standard with 550mm lead: aileron Landing Gear Electronic retractable main gear and steerable nose gear with all metal shock absorbing struts Required Battery-6S 22.2V 4000mAh 60C LiPo Required Radio-6 Channel Ailerons Yes Elevator Yes Rudder Yes Flaps Yes Lights No Hinge Type-Nylon hinges Material EPO Foam Skill Level Intermediate Build Time 2 Hours Recommended Environment Outdoor

Write a review

Note: HTML is not translated!
Bad           Good